Dura-Color Antique Release Agent: With over 40 standard designer colors, Dura Color Antique Release Agent will give you the beautiful results you're looking for. This product is a colored powdered release agent that will provide a contrasting effect on any stamped concrete.

BENEFITS: • Easy to use powder with stamp release capabilities • Colored to enhance any decorative concrete surface • Made with stable, U.V. resistant, streak-free, iron oxide pigments • 40 standard colors are available, with custom colors matched to order

DESCRIPTION: PROLINE DURA ANTIQUE RELEASE is used as a bond breaker in the stamping process. It is a dust-on powder with water repellent properties that helps prevent wet concrete from adhering to the polyurethane texture mat. PROLINE DURA ANTIQUE RELEASE is also used as a coloring agent, leaving a portion of the color, usually darker than the concrete color, imbedded in the low points of the newly textured concrete. This product should be broadcast in thin, even coats that overlap just enough to produce a uniform layer on the slab surface. Release powder can be thrown by hand or with a 6” mason’s brush. Stamping can begin as soon as the release agent is applied. Allow concrete to cure for at least 24 hours before removal to prevent damage to the brand new surface. Removal is accomplished by brushing then rinsing with a garden hose spray nozzle, light pressure wash, scrubbing, or buffing. Remove only enough to achieve desired antique effect. Final color that matches the color chart can only be seen by sealing with a quality concrete sealer such as PROLINE High Gloss Dura-Seal.

COVERAGE: One 30 pound bucket of PROLINE DURA ANTIQUE RELEASE covers approximately 1000 square feet. The rate may vary slightly, but will be in the range of 3 to 4 pounds per 100 square feet.

Click Below on images to view the Color Charts